Max Number of Classes (256 on the low end model like 900 and 2048 on high end model like 12K)
Max Number of Dynamic Partitions (0 for the low end model(900) and 20,000 on the high end model (12K))
Max Number of Static Partitions (128 for the low end model and 2048 for the high end model)
Max Number of Shaping Policies (256 on the low end and 2048 on the high end model)
Max Number of IP Hosts (5000 on the lowend and 300,000 on the high end)
Verify 24hr performance run with default configuration. Verify that DUT can sustain 1G with default configuration (Shaping OFF, Discovery OFF) for 24 hours
Verify disk I/O performance is within expected range. Measure Disk I/O while running performance test at 900Mbps.
sudo apt-get install sysstat
Max Number of Dynamic Partitions (0 for the low end model(900) and 20,000 on the high end model (12K))
Max Number of Static Partitions (128 for the low end model and 2048 for the high end model)
Max Number of Shaping Policies (256 on the low end and 2048 on the high end model)
Max Number of IP Hosts (5000 on the lowend and 300,000 on the high end)
Verify 24hr performance run with default configuration. Verify that DUT can sustain 1G with default configuration (Shaping OFF, Discovery OFF) for 24 hours
Verify disk I/O performance is within expected range. Measure Disk I/O while running performance test at 900Mbps.
sudo apt-get install sysstat
psqa@psqa-Precision-WorkStation-T3500:~$ iostat -d /dev/sda
Linux 3.2.0-54-generic-pae (psqa-Precision-WorkStation-T3500) 11/28/2013 _i686_ (4 CPU)
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
sda 0.18 0.16 7.96 771498 38314036
12k Performance STD 500 classes
- Setup 12k on the Avalanche
- Configure avalanche for 80/20 TCP/UDP ratio
- Configure avalanche for 80/20 TCP/UDP ratio
-Run script to add 500 IP based classes
- Step up throughput until the 12k begins to load shed.
- Step up throughput until the 12k begins to load shed.
